1） ED-WLS oscillator is a special device for linear swing. 2） Small, light, easy to operate and no place restrictions. 3） Swings with a digitally adjusted, the center of the movement, left stop time, the right to stop time, swing speed. 4） Torch auto back to center when stop. 5） Wide working voltage range with switch power supply, and not affected by input voltage.
1） ED-WLS oscillator is a special device for linear swing.
2） Small, light, easy to operate and no place restrictions.
3） Swings with a digitally adjusted, the center of the movement, left stop time, the right to stop time, swing speed.
4） Torch auto back to center when stop.
5） Wide working voltage range with switch power supply, and not affected by input voltage.
|
Linear Oscillator
|
|
|
Input power |
AC95~ 250V，50HZ ，1 phase |
|
Control box (W x L x H) |
120 x175 x75 |
|
Weight (Kg) |
2.9Kg |
|
Drive mode |
Rack and pinion |
|
Speed |
0 - 2300mm/Min |
|
Center adjust |
±5mm |
|
Swing width |
0-35mm |
|
Stop time for left and right |
0 - 2s |
（1）Power switch: Power indicator will light when power switch is at ON position, and it must turn OFF after complete the work.
（2）Power indicator: Power switch to the ON position, the power indicator lights.
（3）Power Fuse: If the current overload, the fuse will be fused to protect the system.
（4）Start button: Press this button to work immediately.
（5）Stop button: Press this button to stop working.
（6）Left stop time: Control the torch staying time at left, time setting range 0 ~ 2s.
（7）Right stop time: Control the torch staying time at left, time setting range 0 ~ 2s.
（8）Speed control: Can control the swing frequency.
（9）Swing control: Can control the swing amplitude.
（10）Center adjust: Can control the center of swing。
|
NO. |
Description |
Mat' / Model |
Quantity |
Remarks |
|
1 |
box |
steel |
1 |
|
|
2 |
Side handle |
Stainless steel |
2 |
|
|
3 |
Top handle |
alum |
1 |
|
|
4 |
magnet |
40*20*10 |
1 |
|
|
5 |
Magnet base |
alum |
1 |
|
|
6 |
Rubber feet |
rubber |
4 |
|
|
7 |
Drive PCB |
|
1 |
|
|
8 |
Panel plate |
alum |
1 |
|
|
9 |
Holder with fuse |
250v, 5A |
1 |
|
|
10 |
receptacle |
6P |
1 |
|
|
11 |
Power receptacle |
3P |
1 |
|
|
12 |
Panel PCB |
|
1 |
|
|
13 |
Potentiometer |
5kΩ |
5 |
|
|
14 |
Button cover |
brass |
2 |
|
|
15 |
Turning knob |
plastic |
5 |
|
|
16 |
Stop button switch |
103C |
1 |
Red cap |
|
17 |
Start button switch |
103C |
1 |
Black cap |
|
18 |
Power switch |
|
1 |
|
|
19 |
Power lamp |
|
1 |
|
No. 1 Intersection of Chuangye Avenue and Weilai Avenue,
Yiyang County,Luoyang City, Henan Province, China
+86 400-0379-069
info@bota-weld.com
Copyright © 2023 An Automated Welding and Cutting Equipment Manufacturer Focusing on Welding Column Boom and Welding Rotator | All Rights Reserved Technical support: ShangXian
